bearded dragon handbook

Get our pet owner's guide for bearded dragons and help your special friend live its best life.

5 Best Incubators For Bearded Dragon Eggs

Are you considering breeding and incubating bearded dragon eggs?

Are you unsure what gear you need to hatch bearded dragon eggs?

One of the essential items you need to hatch beardy eggs is an incubator.

Finding the right one doesn’t have to be hard if you have help.

We’ve got you covered!

Read on for our list of the best incubator for bearded dragon eggs.

bearded dragon laying on eggs

Bearded Dragon Incubators In This Review

Do You Need An Incubator For Bearded Dragon Eggs?

Yes!

Bearded dragons are born and live in the hot deserts in Australia.

Unless the interior climate of your house matches this climate, you need an artificial way to match this environment.

In the wild, bearded dragons lay clutches of around 20 eggs at a time.

The reason this is so high is, so some of the reptiles survive until adulthood.

In an artificial setting, use a reptile incubator to keep most or all of these eggs viable to birth.

You don’t want to keep the eggs in the enclosure with the adult bearded dragons.

As often happens in nature with reptiles, bearded dragons don’t care for their young and may consume them.

Check out our article on what a bearded dragon can live with for more information on beardy cohabitation.

What Should The Humidity Be For Bearded Dragon Eggs?

A good incubator has some ways to help control the humidity of the climate.

This is often done with a pan or tray of water inserted at the bottom of the incubator.

A bearded dragon egg should be kept at around 40-50% relative humidity.

What Should The Temperature Be For Bearded Dragon Eggs?

The more control you have over the enclosure temperature, the better.

Most quality incubators come with a built-in thermometer. Some even have automatic shut-offs when they sense the temperature reaching a specified point.

The safest temperature for bearded dragon eggs is as close to 84Ā° degrees Fahrenheit (29Ā° C) as possible.

Temperature a little above increases the chances the eggs will hatch a male bearded dragon.

Lower temperatures increase the likelihood of hatching a female bearded dragon.

Most reptile incubators are designed for this range, but there are incubators which service a more extensive range.

This may be a wise choice if you plan on incubating other types of reptiles and animals which require a lower temperature than the bearded dragon does.

Review Of The Best Incubators For Bearded Dragon Eggs

bearded dragon eggs in tray

In this section, we look at our picks for the best-bearded dragon eggs.

Each product may be perfect for you depending on your situation, so make sure to read each one carefully.

IVYX Scientific Incubator Refrigerator

IVYX Scientific Mini 5L Incubator - Precise Temperature Control
  • VERSATILE: Can be set as a refrigerator or warm incubator for a variety of science projects. Especially well suited to grow yeast for sourdough bread making.
  • PRECISE TEMPERATURE CONTROL: from 0Ā°C to +55Ā°C in increments of 1Ā°C. If kept on the same shelf, temperature fluctuations of 0.5Ā°C (temperature Gradient exists between the bottom and top of incubator)
  • CAN BOTH HEAT AND COOL: Can cool down down ~23Ā°C below ambient temperature, heat up to 55Ā°C
We earn a commission if you click this link and make a purchase at no additional cost to you.

This precise scientific incubator by IVYX is a multi-use refrigerator with great and accurate control over the temperature in the space.

Though it costs more than some other options, its versatility makes its value higher.

The range of temperature this combo device can handle is between 32Ā° – 149Ā° degrees Fahrenheit (0Ā° – 65Ā° C).

This considerable range makes it useful as both a warm incubator for eggs and a fridge for keeping medicine and some foods cold.

The controls allow for precise degree selection.

This allows you to pick the exact temperature in increments of 1Ā° degree.

Some incubators of poorer quality may fluctuate a significant amount in temperature depending on certain parts of the product.

Still, IVYX has it consistent within a half of a degree within the same shelf.

It has a small footprint with dimensions of 8x11x12 in.

The incubation container holds up to 5 liters and weighs only 9lbs.

Here is what the users had to say about using the product:

Pros:

  • Small size stays out of the way
  • Within each shelf, it remains very close to the same temperature
  • Excellent control of the specific temperature

Cons:

  • May come damaged or missing parts, but the company is easy to return with

OrangeA Reptile Egg Incubator

OrangeA Reptile Egg Incubator
  • Precise Temperature Control: The temperature of our reptile incubator can be adjusted from 5 ā„ƒ to 60 ā„ƒ/41ā„‰ to 140ā„‰ in increments of 1ā„ƒ/34ā„‰, providing a constant temperature incubation environment for the eggs.
  • User-Friendly LED Display & Button: The black reptile egg incubator features a clear LED digital screen to display the current chamber temperature. And the external buttons beside the LED screen make it simple to control.
  • Large Capacity: Our scientific lab incubator has a spacious 25 L chamber volume to provide enough habitat space for your reptilian friend. It comes with two removable shelves, which create 3 platforms. And there is a water tray to keep humidity.
We earn a commission if you click this link and make a purchase at no additional cost to you.

OrangeA’s reptile egg incubator is quality but a slightly more affordable option for those looking for a heavy-duty, consistent incubator.

This incubator comes with a range of 36Ā° – 140Ā° degrees Fahrenheit (2Ā° – 60Ā° C).

This makes it well suited for incubating and cooling eggs.

With a broad range, it’s possible to use it with more than just bearded dragon eggs.

OrangeA’s incubator has plenty of space for handling a more considerable amount of eggs.

The interior dimensions are 9.4Ɨ10.6Ɨ14.6 inches, and the external is 16.4Ɨ13.4Ɨ18.8 in.

Even with this larger space, the incubator’s interior setup is customizable with two-layer, slidable shelves.

There’s also a slidable sink for keeping the egg hatching temperature steady.

The digital and LED display helps you see the settings for the incubator, and the interior light lets you check on the process without losing temperature and risking egg loss.

Customers had this to say about the OrangeA incubator:

Pros:

  • Temperature and humidity settings stay consistent
  • Ample and adjustable space on the interior
  • Works well for hot or cold
  • Excellent company to work exchanges through

Cons:

  • No consistent complaints were found

Zoo Med ReptiBator

Zoo Med Reptibator Egg Incubator
  • Digital controller with LCD display and LED heat indicator light
  • Pulse proportional thermostat for stable temperature regulation
  • Temperature control range from 59Ā°F to 104Ā°F (15Ā°C to 40Ā°C
We earn a commission if you click this link and make a purchase at no additional cost to you.

As another quality yet affordable option, Zoo Med’s ReptiBator is a dedicated incubator for reptile eggs, lizard egg, snake eggs, etc.

The temperature control for this unit ranges from 54Ā° – 104Ā° degrees Fahrenheit (12Ā° – 40Ā° C).

This makes it work well with warm reptile egg incubation, like the kind needed for bearded dragons.

This incubator features an LCD and an LED heat indicator light.

These clear controls also affect the relative humidity of the incubator.

The humidity control adjusts between 10% – 95% relative humidity to match the reptile’s native climate.

The whole dimensions of this product are 18x18x9.5 inches, which gives the unit an average amount of space.

One of the best features of the ReptiBator is the built-in temperature alarm and memory.

With this, you won’t be surprised if there are problems, and you will take the steps you need to protect the eggs.

The user experience boiled down to the following:

Pros:

  • Consistent temperature regulation
  • Alarm and setting memory features protect from egg loss
  • Controls are easy to use and understand
  • Humidity regulation works well throughout the whole unit

Cons:

  • May cost more than the features it offers
  • Limited to warm incubation

GQF Thermal Air Hova-Bator

GQF Thermal Air Hova-Bator
  • The GQF Hova-Bator has been wide recognized for over 30 years as the world's best small incubator.
  • This Thermal Air Flow model, the 1602N, is the most economical and efficient incubator available.
  • Heated air flows out the exhaust vents on top and draws fresh air through the bottom vent.
We earn a commission if you click this link and make a purchase at no additional cost to you.

The GQF Thermal Air Hova-Bator is a very affordable model incubator for those looking to save some money but still get a product that works.

The thermal airflow technology makes it more economical with its energy than most other incubators.

The air is heated from below and is then released through the top.

This airflow keeps the air humidity steady and saves energy.

GQF includes two windows on top to see the eggs within, making it easier for you to judge how the incubation is going without opening the unit.

The Hova-Bator is used for reptiles like the bearded dragon but is also used with poultry such as chickens, ducks, and guinea fowl.

The customers had the following to say about their experience:

Pros:

  • Affordable price
  • Large storage area
  • Energy efficient
  • Easy to set up

Cons:

  • The controls may make it hard to keep it a specific temperature
  • Requires more effort and checking on the owner’s part

Exo Terra Precision Incubator Pro

We earn a commission if you click this link and make a purchase at no additional cost to you.

This Exo Terra bearded dragon incubator may cost the most of all the products on our list, but it comes with many features that may make it just what you’re looking for.

The digital temperature control, which comes in bright and clear LED, allows for smooth and precise temperature selection.

This accurate control and design by Exo Terra resist temperature fluctuations, which sometimes result in egg loss.

The incubator comes with two sliding shelves for custom setup and to maximize space.

There’s also an easy on/off interior light to see the eggs inside without disturbing the incubation process.

The incubator has heating and cooling capabilities that kick in whenever the incubation temperature moves away from where you set it.

This is a step up from other incubators, which only shut off the heater when the temp gets too high.

Humidity is controlled by adding water to a slide-out tray at the bottom, as many other incubators do as well.

The temperature range is 36Ā° – 140Ā° degrees Fahrenheit (2Ā° – 60Ā° C), which is suitable for a variety of reptile eggs, not just bearded dragons.

The user said the following:

Pros:

  • Wide range of temperature selections
  • Easy and precise controls
  • The heating and cooling unit prevent egg loss
  • Large, adjustable storage space

Cons:

  • Humidity tray may get stuck on occasion

Conclusion

We hope you found our list of the best incubator for bearded dragon eggs helpful.

Any of these may be just right for you.

Think about what you need it for and how much you’re willing to spend.

Breeding and hatching bearded dragons is a lot of fun and an easy thing to do with the right tools, and a good incubator is a must-have for this.

Leave a Comment